Spray Activador CA PS
acelerador de curado para adhesivos instantáneos
Disponible, plazo de entrega: 1-3 días laborales
Información sobre el producto
Acelerador de curado a base de heptano para WEICON Adhesivos de Cianoacrilato con pulverización de presión
The CA-Activator Spray PS accelerates the curing of WEICON Contact Cyanoacrylate Adhesives. It can be applied both before and after the bonding process. The activator enables a quick fixation; however, it can also be used to allow excess adhesive to cure. When applied to absorbent and porous surfaces, such as wood, foam etc., and all chemically treated surfaces, such as electrogalvanised metal etc., the activator’s effectiveness lasts approx. one minute. On non-absorbent surfaces, the activator’s effectiveness lasts up to approx. 12 hours. The pump spray head ensures that the surfaces to be bonded are wetted evenly and precisely with the activator. Use is recommendable with highly viscous WEICON Contact types, large layer thicknesses, absorbent and porous surfaces, passive materials (alkaline surfaces, e.g. galvanised metal parts) and unfavourable environmental conditions (low temperatures, too low humidity < 30 %).
Downloads
Information
- Aktivator
- Spraydose
Iniciar sesión
Product safety
Peligro
H222, H229 - Extremely flammable aerosol. Pressurized container: may burst if heated.
H315 - Provoca irritación cutánea.
H336 - Puede provocar somnolencia o vértigo.
H411 - Tóxico para los organismos acuáticos, con efectos nocivos duraderos.